POWER BLOCK – photo1
POWER BLOCK – photo 2
POWER BLOCK – photo 3
SINGLE-ELEMENT DIODE POWER BLOCK
WITH WATER COOLED HEATSINK
Characteristics:
• single-element diode power module with water cooled heatsink;
• water cooling.
Applications:0
• rectifiers,
• power supplies.
Options:
• clamping in K-1 (photo 1);
• clamping in K-2 (photo 2);
• clamping in K-3 (photo 3);
• thermal protection;
• RC system;
• fuses.
Selection of power blocks:
Depending on the load of power block there are used different semiconductors. Size of the applied semiconductor is specified in Table 1.
Working conditions:
Single-element power blocks with water cooling are assigned to work in power electronic inverter systems:
• temperature of cooling water on entry: 50C – 300C for temperature of ambient air not lower than
-100C;
• atmospheric pressure: 860hPa – 1060hPa;
• cooling water: resistivity not lower than 5x105 Ω•cm, ph 5 – 8 and hardness not higher than 80mg CaO/dm3
Configuration:
Table 1. Technical parameters of power blocks
Type of module
Medium current
of
semiconductor IT(AV)
[A]
Reverse voltage
and blocking
voltage of
semiconductor
UDRM, URRM
[V]
